ADI CONTROLS Model AST-221 is a S-type load cell (also known as an S-beam or S-shaped load cell) is a tension and compression force transducer characterized by its distinct S-shape. It’s highly versatile, designed to measure both tensile force (pulling) and compressive force (pushing). This dual-capability is one of its primary advantages. When a force is applied (either tension or compression), the S-shaped body deforms slightly. Strain gauges bonded to the internal webs of the S-shape measure this deformation and convert it into a proportional electrical signal. It is also known as 20210
Product Type
Single Point Aluminium Load Cell
Usage
Table top scales, Counting and postal scales, Check weighers.
Material
Aluminium
Output
Analog Sensor
Theory
Resistance Sensor
Compensated Temperature
10 To 60 Celsius (oC)
Rated capacity (NM)
5, 10
Excitation Voltage
10 V DC – Maximum 15 V DC
Full Scale Output
2.0 mV / V
Non – Linearity
<± 0. 1 % FSO (Full scale Output)
Hysteresis
<± 0.1% FSO
Non-Repeatability
<± 0.1 % FS0
Creep error (30 minutes)
<± 0.3% FSO
Zero Output
± 1.0 % FSO
Input Resistance
392 ± 10 Ohms
Output Resistance
392 ± 10 Ohms
Insulation Resistance
>1000 Mega Ohms
Safe Overload
150 % of Rated Capacity
Ultimate Overload
250 % of Rated Capacity
Temperature
Compensated Range
10 to 60°C
Temperature Effect at Full Load
<0.05 % FSO/° C
Temperature Effect on
Zero
<0.05 % FSO/° C
Environment Protection
IP 65
Finish & Construction
Stain Less Steel 17-4 PH
Rotational Angular Deflection
< 0.2 at FSO
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
