ADI CONTROLS Model AST-221 Aluminium is an aluminium S-type load cell (also known as an S-beam or S-shaped load cell) is a tension and compression force transducer characterized by its distinct S-shape. It’s highly versatile, designed to measure both tensile force (pulling) and compressive force (pushing). This dual-capability is one of its primary advantages. When a force is applied (either tension or compression), the S-shaped body deforms slightly. Strain gauges bonded to the internal webs of the S-shape measure this deformation and convert it into a proportional electrical signal. It is also known as 20210
Product Type
Single Point Off Center Load Cell
Usage
Batching Plant, Bag Weighing, Check Weighing, Table top scales, Counting and postal scales, Check weighers.
Material
Tool Steel
Output
Analog Output mV/V
Theory
Strain Gauge Principle
Compensated Temperature
0°C to 60°C
Rated capacity (Kgf)
11, 15, 22.5, 45, 90
Excitation Voltage
10VDC-Maximum 15 VDC
Rated Output
2.0 mV/V
Non – Linearity
< ± 0.025 % FSO (Full scale Output)
Hysteresis
< ± 0.01 % FSO
Non-Repeatability
< ± 0.02 % FSO
Creep error (30 minutes)
< ± 0.03 % FSO
Zero Load Output
< ± 0.03 % FSO
Input Resistance
390 ±15 Ohms
Output Resistance
350 ±5 Ohms
Insulation Resistance
>1000 Mega Ohms
Cable length
3 meters
Safe Overload
150 % of Rated Capacity
Ultimate Overload
250 % of Rated Capacity
Temperature
Compensated Range
0 to 60° C
Temperature Effect on
Output
<0.0015 % FSO/° C
Temperature Effect on
Zero
< 0.002 % FSO/° C
Max. Platform Size
500 x 500 mm
Off Center Load Error
< 0.02% of FSO at 1/3 rated
load/250mm off center
Deflection
< 0.5 mm at FSO
Finish & Construction
Electroless Nickel plated Tool Steel.
Environment Protection
IP 67
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
Randomised words which don’t look even slightly believable. If you are going
to use a passage of Lorem Ipsum, you need to be sure there isn’t anything.
